BESTO TyLo AFFIX-T1

Key Features & Benefits
  • Single-component - Just add water.
  • Easy to apply - smooth, workable paste.
  • Bonds to a wide range of substrates.
  • Economical - high coverage, minimal wastage.
  • Exceeds IS 15477:2019 Type TI standards.
Ideal Substrates
  •  Concrete & Concrete Masonry.
  • Cement Mortar Beds.
  • Ceramic Tiles.
  • Brick Masonry.
  • Existing Natural Stones.
Technical Specifications (IS 15477:2019)
Test Requirement Typical Value
Tensile Adhesive Strength ≥ 0.5 N/mm2 0.6 - 0.8 N/mm2
Shear Adhesion (Dry) ≥ 1.0 N/mm2 1.1 - 1.3 N/mm2
Slip Resistance ≤ 0.5 mm 0.1 - 0.3 mm
Open Time   25 - 30 minutes
Adjustability Time   25 - 30 minutes
Packaging and Coverage
  • Pack Size: 20kg bags
  • Coverage: 2.5-3.5 sqft/kg. Coverage will vary depending on the trowel notch size type and size of the tile and substrate smoothness and eveness
Storage
  • Store in a dry, cool area. Use within 12 months from manufacturing date.
Steps
Clean surface of dust, grease,
or loose particles. Pre-wet surface
without leaving standing water.
> Add 4.5–5 L of clean water to 20 kg
powder
> Use a mechanical stirrer for uniform,
bubble-free paste
> Let it rest for 3–4 minutes before
application
> Apply adhesive using notched trowel
> Install tiles within open time
> Tap tiles to eliminate air pockets
> Clean excess material before it hardens
> Use mixed adhesive within the pot life