BESTO TyLo AFFIX-T3

Key Features & Benefits
  •  Single Component - Just add water.
  • Easy to Use & Cost-effective.
  •  Up to 12 mm bed thickness.
  •  Bonds to various substrates.
  •  Water & Shock Resistant.
  •  IS 15477:2019 (Type T3) Compliant
Technical Performance (IS 15477:2019)
Test Requirement Typical Value
Tensile Adhesion(Dry) ≥ 1.5 N/mm2 1.55-1.65 N/mm2
Tensile Adhesion(Wet) ≥ 1.0 N/mm2 1.10-1.20 N/mm2
Shear Adhesion(Dry) ≥ 1.5 N/mm2 1.6-1.7 N/mm2
Shear Adhesion(Heat) ≥ 1.0 N/mm2 1.1-1.2 N/mm2
Shear Adhesion(Wet) ≥ 1.0 N/mm2 1.15-1.25 N/mm2
Slip Resistance ≤ 0.5 mm 0.1 - 0.3 mm
Open Time Not Specified 25 - 30 minutes
Adjustibility Not Specified 25 - 30 minutes
Storage

> Store in a cool, dry place. Use within 12 months from manufacturing

Application Guidelines
Packaging & Coverage

> Pack size: 20kg

>Coverage: 2.5-3.5 sqft/kg. Coverage will e vary depending on the trowel notch size type and size of the tile and substrate smoothness and eveness 

Steps
Surface Preparation
Surface Preparation
Ensure surface is flat, clean, dust &
grease-free. Pre-wet surface to
saturation, but keep top layer dry.
MIxing
MIxing
Mix 4.5 – 5L of water per 20kg bag
Stir to achieve smooth, lump-free mix
Let it stand for 3–4 mins, mix again before
use
Application
Application
Spread adhesive with a notched trowel
Place tiles within open time
Tap using rubber mallet to avoid air gaps
Clean excess material before it sets