BESTO TyLo AFFIX-T2

Key Features & Benefits
  • Ready to Use - Just add water
  • Economical & Easy to Apply
  • High Bond Strength
  • Adheres to Multiple Surfaces
  • Complies with IS 15477:2019 (Type T2)
Suitable Substrates
  •  Concrete & Cement Plaster
  • Cement Mortar Beds
  • Brick Masonry
  •  Existing Vitrified/Ceramic Tiles"
  • Natural Stone Surfaces

        Ensure surfaces are clean, dust-free, and roughened before application,

Technical Performance (IS 15477:2019)
Test Requirement Typical Value
Tensile Adhesion(Dry/Wet) ≥ 1.0 N/mm2 1.15-1.25 N/mm2
Shear Strength (Dry) ≥ 1.25 N/mm2 1.35-1.45 N/mm2
Shear(Heat Aged/Wet) ≥ 1.0 N/mm2 1.05-1.20 N/mm2
Slip Resistance ≤. 0.5 mm 0.1-0.3 mm
Open Time   25-30 minutes
Adjustibility   25-30 minutes
Packaging & Storage

> Pack Size: 20kg Bags.

> Coverage: 2.5-3.5 sqft/kg Coverage will depending on the trowel notch size type and size of the tile and substrate smoothnessand eveness.

> Storage: Store in a dry, cool place. Use within 12 months of manufacture.

Steps
> Surface must be flat, clean, and free
from dust, oil, or paint.
> Pre-wet the surface until saturated,
but ensure the top layer is dry before
application.
> Add 4.5–5 litres of water to 20kg powder.
> Mix thoroughly using a mechanical stirrer
until a lump-free, smooth paste is achieved.
> Rest the mix for 3–4 minutes before use.
> Spread adhesive with a notched trowel.
> Place tiles within the open time.
> Tap tiles with a rubber mallet to eliminate
air gaps.
> Clean excess adhesive before it sets.